1.2mmwelding wire E71T-1

Detailed introduction to 1.2mm  welding wire E71T-1:

FLUX Arc Welding wire (E71T-1):

E71T-1 is an all-position, flux cored welding wire, which is intended for single and multiple pass welding of low-alloy and carbon steel where a minimum 70,000 psi tensile strength is required. It is an excellent general purpose welding wire.  A shielding gas must be used with this wire.

Typical Applications
General-purpose flux cored welding of steel
Structural steel
Farm machinery
Construction equipment
General carbon steel fabrication

AWS Specification           
AWS A5.20

AWS Classification           
E71T-1

Welding Current
DCEP (Electrode Positive, Reverse Polarity)

Typical Wire Chemistry
C         0.05
Si         0.74
Mn       1.00
P          0.008
S          0.015

Typical Mechanical Properties (As Welded)
Yield Strength, psi                    71,000
Tensile Strength, psi            82,800
% Elongation in 2"                     25

Welding Positions
All positions

Shielding Gas
100% CO2 or 75% Ar / 25% CO2 mix

Available Diameters
.035", .045", .052", & 1/16"

Operating Range In Amps
.030"    40 –100
.035"    100 – 130
.052"    140 – 180
1/16"    175 – 300