Click image to view full size image
welding electrodes production line
1.SHQ-500A Wire cutting machine
Wire cutting machine is the exclusive equipment for electrode production. It’s used for straightening and cutting off the welding rod core.
Main technical data:
No. | Model | SHQ-500A |
1 | Range of wire cutting length | 200-500mm |
2 | Cutting diameter | Φ2.5-Φ5.8mm |
3 | Cutting speed | 200pieces/min |
4 | Straightener speed | 5800r.p.m |
5 | Flywheel speed | 900r.m.p |
6 | Travel of cutter saddle | 12mm |
7 | Total power | 5.2kw |
8 | Overall size | 1750×650×1250mm |
9 | Weight | 0.9T |
10 | Throughput | 1.5T/8H |
2.SHB Powder mixer
Power mixer is the exclusive machine for electrode production which is used to dry mixing and wet mixing. It adept double-S axles to forwarding and reversal mixing to flux more equal and even. The torque of machine is big to produce common and special welding electrodes mixing.
Main technical data:
No. | Model | SHB-300A | SHB-500A |
1 | Volume | 300L | 500L |
2 | Revolution speed of blade | N1=30.6r.p.m | N1=28.7r.p.m |
3 | Total power | 16.5kw | 20kw |
4 | Overall size(mm) | 2069×1463×1920 | 2625×1843×2115 |
5 | Weight | 2.5T | 4T |
6 | Throughput | 2.4T/8H | 4T/8H |
3.SHS-160 Wire -feeding machine
Wire drawing machine is the exclusive machine in welding electrode production line. It is used to feed the welding core to coating dies at 45° angle automatically to satisfy the needs of coating procedure continuingly.
Frequency control system is optional.
Main technical data:
No. | Model | SHS-160A | SHS-160Y |
1 | Diameter of wire-feed wheel | 160mm | 160mm |
2 | Range of diameter of wire | Φ2.5-Φ5.8mm | Φ2.5-Φ8.0mm |
3 | Wire-feed long | 300-400mm | 300-500mm |
4 | Wire-feed speed | 135--380M/min | 100--380M/min |
5 | Working height | 990mm | 1050mm |
6 | Total power | 6.25kw | 6.25kw |
7 | Overall size | 1495×728×1560mm | 1595×850×1560mm |
8 | Weight | 1.6T | 1.63T |
4.SLT Helix powder coating machine
Helix coating machine is the special equipment for welding electrode production.
The machine use helix coating craft,Can ensure continuous coating welding powder to the welding core surface.
Frequency control system is optional.
Main technical data:
No. | Model | SLT-100A | SLT-140A |
1 | Powder cylinder diameter | 100mm | 140mm |
2 | Remer speed | 32-60r.p.m | 26-40r.p.m |
3 | Working height center | 990mm | 990mm |
4 | Motor power | 22kw | 30kw |
5 | Overall size | 1390×1080×1245mm | 1450×1080×1245mm |
6 | Weight | 2.2T | 2.4T |
7 | Throughput | 8T/8H | 12T/8H |
welding electrode production line
